Rayfast Logo Header

Material Selection - Moulded Heat-Shrinkable Parts & Shapes

Moulded parts and shapes can be manufactured in a wide range of materials, allowing engineers and material specifiers to design electrical harness systems with optimum performance characteristics for any given application. Listed below are the standard materials available for most moulded parts covered in this section, additional technical details are covered in more

-3 Semi-rigid modified Polyolefin
General purpose, heat-shrinkable semi-rigid and flame retardant polyolefin moulding compound.
• Operating Temperature from -55ºC to +135ºC
• Flame retardant
• Good resistance to fluid and heat
• UL224, E85381 and SAE-AS81765/1 Type I
Download the PDF for -3 Semi-rigid Polyolefin

-4 Flexible Polyolefin
A general purpose, heat-shrinkable flexible and flame retardant polyelefin moulding compound.
• Operating Temperature from -55ºC to +135ºC
• Flame retardant
• Good resistance to fluid and heat
• UL224, E85381 and SAE-AS81765/1 Type II
Download the PDF for -4 Flexible Polyolefin

-12 Modified Fluoro-elastomer
A high temperature, heat-shrinkable, flexible, flame-retarded, fluro-elastomeric moulding compound.
• Operating Temperature from -55ºC to +200ºC
• Excellent long-term fuel immersion resistance
• Fluid resistant and flexible
• Flame retardant
Download the PDF for -12 Modified Fluoro-elastomer

-25 Fluid-resistant Elastomer
A heat-shrinkable, fluid and temperature resistant, elastomeric moulding compound, designed to offer excellent performance in harsh environments.
• Operating Temperature from -75ºC to +150ºC
• Chemical and abrasion resistance
• Excellent high temperature fluid resistance
• Flame retardant
Download the PDF for -25 FluidResistant Elastomer

-100 Low Fire Hazard material
A heat-shrinkable, semi-flexible, low fire hazard moulding compound designed to offer excellent fire safety charecteristics combined with low smoke and low acid gas emission.
• Operating Temperature from -30ºC to +105ºC
• Low smoke as defined BS G 198 part 5
• Low-toxicity index as defined by NES 713
• High-temperature index defined by ISO 4589-3
• Flame retardant
Download the PDF for -100 Low Fire Hazard Material

Note: Additional specialist materials are also available. For more information please contact us on +44 (0) 1793 616700 or email us at uksales@is-rayfast.com.

Download the PDF for Material Selection as above.

Moulded Parts image

 

Product Overview - Wire & Cable, Heat-Shrink Tubing & Moulded Parts

 

TE Connectivity

Authorised Distributor for TE Connectivity
Raychem Wire, Harness, Protection & Identification Products


Terms & Conditions | GDPR | Privacy Policy | Trademarks & Disclaimer | Sitemap | Download Adobe